The key reason why that the Xbox 360 screen freeze problems come about is a result of the machine heating up. If you notice three of the green lights on your own gaming system turn red, your Xbox system is getting hot that leads the GPU to tug out of the motherboard. When left unattended, the system board continues to get hot after which to vibrate. In the event the motherboard vibrates, the link with the GPU through solder joints actually starts to break down as well as your Xbox stops.
You are going to find here to help you through the Xbox 360 freezing problems as well as ways to correct heating up damage. Before we go on, let us address a common and unsafe myth that wrapping a big towel around your Xbox 360 will fix the freeze up problem. This is not true and in fact makes it all worse. Doing this will do away with any chance of your effectively fixing it yourself and your only solution could be to send it off to Microsoft to fix it.
Repairing your Xbox 360 console Freezing Problems
To fix your Xbox and do away with freezing instances here are a few steps comparable to what you would find in your repair guide:
1. Take off the covering. The faceplate can be taken off if you take a fine tip tool and poking the grayed out hole and also the little rectangle shaped holes from the back.
2. When you take off the faceplate, move the latch up that is part of the DVD drive.
3. Look below the plastic casing and unscrew the metal case.
4. It's easy to take away the DVD drive and remove the cables.
5. Next, comes the motherboard and fan.
6. Locate a large silver piece containing very long holes after flipping the motherboard inverted and making use of exactly the same poker as utilized before pop the corners of the X-shaped clamp positioned beneath the silver piece.
7. Bring in the GPU as well as CPU by taking out the heat sink.
8. Take Arctic silver thermal compound and put a lot on the GPU and wait 25 % of an hour.
9. Place the washers about the screws situated on the heat sink and place it well within the motherboard.
10. Place two more washers around the screws as they stick in the motherboard.
11. Put the heat sink back on the screws to get them tight.
12. Now you have to work your way backwards in the removal process.
13. Now you can turn on your Xbox 360.
If each of the steps were adhered to the right way, the system must be with no Xbox 360 screen freeze problems.
You are going to find here to help you through the Xbox 360 freezing problems as well as ways to correct heating up damage. Before we go on, let us address a common and unsafe myth that wrapping a big towel around your Xbox 360 will fix the freeze up problem. This is not true and in fact makes it all worse. Doing this will do away with any chance of your effectively fixing it yourself and your only solution could be to send it off to Microsoft to fix it.
Repairing your Xbox 360 console Freezing Problems
To fix your Xbox and do away with freezing instances here are a few steps comparable to what you would find in your repair guide:
1. Take off the covering. The faceplate can be taken off if you take a fine tip tool and poking the grayed out hole and also the little rectangle shaped holes from the back.
2. When you take off the faceplate, move the latch up that is part of the DVD drive.
3. Look below the plastic casing and unscrew the metal case.
4. It's easy to take away the DVD drive and remove the cables.
5. Next, comes the motherboard and fan.
6. Locate a large silver piece containing very long holes after flipping the motherboard inverted and making use of exactly the same poker as utilized before pop the corners of the X-shaped clamp positioned beneath the silver piece.
7. Bring in the GPU as well as CPU by taking out the heat sink.
8. Take Arctic silver thermal compound and put a lot on the GPU and wait 25 % of an hour.
9. Place the washers about the screws situated on the heat sink and place it well within the motherboard.
10. Place two more washers around the screws as they stick in the motherboard.
11. Put the heat sink back on the screws to get them tight.
12. Now you have to work your way backwards in the removal process.
13. Now you can turn on your Xbox 360.
If each of the steps were adhered to the right way, the system must be with no Xbox 360 screen freeze problems.
About the Author:
Want to find out more about screen freeze, then visit Katherine Martina's site on how to choose the best what is a freeze for your needs.
No comments:
Post a Comment